How To Change A Tire: A Step-by-Step Beginner’s Guide

One of the skills of living is knowing how to change a tire. Anyone can get a flat tire anywhere, be it on a highway, your own neighborhood or on a long road trip. Education on the right and safe technique of changing a tire can save you time, money and stress and keep you safe on the road.

This manual explains the process of changing a tire in simple steps even when it is the first time that you do it.

The Reason Why You Need to Know How to Change a Tire.

No waiting hours to get roadside assistance.

• Safety in case of an emergency.
• Economize on towing services.
• Learn to be confident behind the wheel.
• Preparedness can save a lot in situations which are unexpected.

Before Changing a Tire Things You Need.

Always make sure your car carries the following things:

Histórias relacionadas

Teen Nudes Leaked: Understanding the Harm, the Law, and What to Do Next Step by Step Jump through in Ashtanga Yoga: Experiences, Advice and Tips

• Spare tire (inflated).
• Jack.
• Lug wrench.
• Wheel wedges or heavy stones.
• Flashlight (where possible, at night)
• Gloves (optional but helpful)

You already have the majority of these tools in the trunk of your car.

How To Change Tire: Step-by-Step.

Step 1: Park Safely.

Park in an empty flat, smooth place off the road.
Switch on your hazard lights, and use the parking brake.

Hint: Always ensure that you do not change a tire on a slope or a curve.

Step 2: Secure the Vehicle.

Stones or wheel wedges behind the tires can be used to keep them in place.
This is a very important safety measure.

Step 3: Loosen the Lug Nuts.

Slack the lug nuts with the lug wrench, but do not take them out.
When the car is still on the ground turn the wrench counterclockwise.

Step 4: Lift the Car using the Jack.

Place the jack under the suggested jacking point which is approaching the tire that has gone flat.
Lift the car up slowly till the tire is not on the ground.

Step 5: Remove the Flat Tire.

At this point completely unscrew the lug nuts and store them somewhere safe.
Pull the flat tire in a straight direction towards you.

Step 6: Mount the Spare Tire.

Insert the spare tire and fit it in the wheel bolts.
Tighten the lug nuts by hand so as to secure the tire.

Step 7: Lower the Car.

Reduce the vehicle until the spare tire is on the ground but it has a load.

Step 8: Tighten the Lug Nuts.

The lug nuts should be tightened in a star or criss-cross shape.
This would provide an equal pressure and would avoid damages of wheels.

Step 9: Fully Lower the Car.

Reduce the car to the ground and take away the jack.
Looseness- Check the lug nuts one last time.

Tire Changing: Important Tips.

• Test the pressure of a spare tire.
• Slow down–spares are temporary.
• Replacement of the damaged tire should be timely.
• Check alignment and balance by visiting a service center.

Common Mistakes To Avoid.

• Negligence to use a parking brake.
• Lug nuts were loosened on lifting the car.
• Failure to tighten lug nuts.
• Coming home with a defective tire that makes one drive long distances.
• Prevention of these errors will involve safety and will avoid damage.

Perguntas frequentes.

Final Thoughts.

Before you have to overcome an emergency, learning to replace a tire will give you the confidence to do so. You will be prepared to face incidents of unexpected flats at any time and any place with just a bit of practice and the appropriate tools.